DisplayFilingOptions

Show or hide the filing options in the Select Filing Location dialog box and the iManage Work toolbar in Microsoft Outlook.

• 0 (No filing)
• 1 (Delete is visible by default)
• 2 (Private is visible by default)
• 3 (Delete and Private are visible by default)
• 4 (Print is visible by default)
• 5 (Delete and Print are visible by default)
• 6 (Private and Print are visible by default)
• 7 (All three options are visible by default) Default

DefaultFilingOptions

Specify which filing options should be selected by default in the Select Filing Location dialog box.

NOTE: This option determines the initial settings displayed when users launch Outlook. Once the users select or clear any option manually, the manual selections persist whenever Outlook is relaunched.

• 0 (None selected) Default
• 1 (Delete is selected by default)
• 2 (Private is selected by default)
• 3 (Delete and Private are selected by default)
• 4 (Print is selected by default)
• 5 (Delete and Print are selected by default)
• 6 (Private and Print are selected by default)
• 7 (All three options are selected by default)

MaxClientMatterSearchResults

Set the value for the maximum number of clients or matters shown in the client and matter autocomplete lookups.

• Default value: 1000
• Maximum value: 9999

EnableMultiSelection

Shows the multi-selection list control by default.

NOTE: When a user manually selects or unselects the File to Multple locations check box, the value set for the EnableMultiSelection registry setting under the following location takes precedence. The value in the registry setting takes precedence until it is manually reset.  

HKEY_CURRENT_USER\Software\iManage\Work\10.0\EMM\Cache\UI 

• 1 (True) Default
• 0 (False)

SearchforWorkspaces

Specify whether Search for Workspaces should be the default option.

• 1 (True) Default
• 0 (False)

ShowSendOnly

Show or hide the Send Only button.

Example:

"ShowSendOnly": 1

• 1 (True) Default
• 0 (False)

ShowSendAndFile

Show or hide the Send and File button.

Example:

"ShowSendAndFile": 1

• 1 (True) Default
• 0 (False)

ForceFileOnSend

Prompt you to file emails (using the Select Filing Location dialog box) while sending emails.

Example:

"ForceFileOnSend":1

• 1 (show the dialog box) Default
• 0 (don't show the dialog box)

SearchInterval

NOTE: If set to zero, automatic searches are not triggered and have to be manually triggered by the user.

Set the interval value (in milliseconds) for automatically searching the workspace in the Select Filing Location/Browse and File dialog box.

Example:

"SearchInterval":0

Default value: 1000

Recommendation: 1000 - 5000 milliseconds

WorkspaceView

NOTE: If you are deploying iManage Work Desktop for Windows to a multi-user environment (such as Citrix), you should remap the WorkspaceView registry setting  to the users' roaming profile to retain the changes made to their column settings at the following location:

the HKEY_CURRENT_USER\Software\iManage\Work\10.0\EMM\

Default columns:

• imProfileName
• imProfileCustom1
• imProfileCustom1Description
• imProfileCustom2
• imProfileCustom2Description

For the list of additional columns that can be added, refer to Appendix G - List of supported property names for configuring the workspace view v10.6.0_WDW.

ShowFullPathOnMouseHover

Enable the mouse-hover display, which lets you see the following in the Select Filing Location dialog box tree view:

• Database name
• Workspace name
• Folder name

NOTE: This option applies only to the Browse and File and Select Filing Locations dialog boxes and not the iManage Work toolbar in Microsoft Outlook.

• 1 (show) 
• 0 (hide) Default

RestoreSendAndFileAction

Persist your selections when the Select Filing Location dialog box is relaunched.

Example:

"RestoreSendAndFileAction":0

• 1 (True)
• 0 (False) Default 

MaxRecentSearches

Specify the maximum number of terms to be displayed in the search history when you search for workspace or folder in the Select Filing Location dialog box.

Default value: 10

Recommendation: 5–50

EnableSendAndFileOnSendToRecipient

Enable the Send and File option when sending an attachment from another application.

Example:

"EnableSendAndFileOnSendToRecipient":1

• 1 (Enabled) Default
• 0 (Disabled)

BrowseAndFileSearchField1

Specify the profile field to be used for first search field in the Browse and File dialog box. The valid values are Custom1, Custom3 to Custom12, and Custom29

Example: 

"BrowseAndFileSearchField1":"Custom1"

• Custom1
• Custom3 to Custom12
• Custom29

BrowseAndFileSearchField2

Specify the profile field to be used for second search field in the Browse and File dialog box. The valid values are Custom1 to Custom12, Custom29, and Custom30. If Custom2 or Custom30 are specified, then the value for BrowseAndFileSearchField1 must be the associated parent field.

Example: 

"BrowseAndFileSearchField2":"Custom2"

• Custom1 to Custom12
• Custom29
• Custom30

UseClientSideFiling

By default, the Microsoft Outlook client uses client-side filing even if the server supports server-side filing when:

• Using the File option or 
• Users drag-and-drop emails into the iManage Work panel. 

If this option is disabled, server-side filing is used if available.

NOTE: UseClientSideFiling does not control the filing behavior of the Send and File action, or the Inbox Filer and Sent Items Filer.

1 (Client side filing) Default

0 (Use server side filing when possible)

ClientSideSendAndFile

Enable this option if you want to use client-side filing for the Send and File action.

1 (Enabled)

0 (Disabled) Default

RemoveBCC

When using client-side Send and File (from the Sent Items folder), this option controls whether the BCC information should be retained or not.

The default setting is off, which means that messages filed using client-side Send and File will contain BCC information that may be visible to other recipients/users in the firm. If you do not want BCC information saved in iManage Work along with the message, enable this option by setting it to 1.

NOTE: This setting is used with the client-side Send and File only.

Example:

"RemoveBCC":0

1 (Remove)

0 (Do not remove) Default

EnableInboxFiler

Enable Inbox Filer so that it can monitor and file all the emails in your Inbox that are sent with a luggage tag in the subject and no iManage Work folder email address in the recipient field, and then files the emails and marks them as filed.

NOTE: Inbox Filer and Send and File are configured separately. If you enable Send and File and disable Inbox Filer, only the Send and File feature works. If you enable Inbox Filer then both Send and File and Inbox filer work. You cannot disable Send and File by enabling Inbox Filer.

Example:

"EnableInboxFiler":"FALSE"

TRUE (enabled)

FALSE (disabled) Default

InboxFilerInterval

Time duration in seconds after which the Inbox Filer process is invoked. The default interval is 120 which means that the Inbox Filer runs after every 2 minutes to check for and file emails.

Example:

"InboxFilerInterval":"120"

Default value (in seconds): 120

RegressNumOfDaysInboxFiler

The number of days Inbox Filer needs to regress to look for emails. The default value is 30 days (1 month).

Example:

"RegressNumOfDaysInboxFiler":30

Default value: 30

SyncRecipientsLimit

Inbox Filer processes emails only if the maximum number of recipients in the email is less than SyncRecipientsLimit. Change the default value as desired to ensure that general emails sent to a large number of people or the entire organization do not get filed.

Example:

"SyncRecipientsLimit":50

Default value: 50

EnableMappedFolder

Enable this option to ensure that client-side filing is used for mapped folder.

Example:

"EnableMappedFolder":"FALSE"

TRUE (enabled)

FALSE (disabled) Default

ExcludedMessageClasses

Use this option to ignore certain type of email messages while processing mapped folders. Separate the message classes by semicolon.

Example:

"ExcludedMessageClasses":"IPM.Note.WorkSite.Ems.Error"

Default value: IPM.Note.WorkSite.Ems.Error

(Message class for emails that could not be filed to iManage Work and resulted in an error.)

BatchSize

By default, the emails in mapped folders are processed in a batch of 10. Once the first 10 emails are processed, the next 10 are processed, and so on.

NOTE: After the emails are processed, it may take the Inbox Filer a time ranging from 1 to 10 minutes to mark them as filed.

Example:

"BatchSize":"10"

Default value: 10

RetryCount

The number of filing and marking attempts to make before ignoring an email in a mapped folder.

Example:

"RetryCount":"15"

Default value: 15

MappedFolderInterval

Time duration in minutes after which the mapped folders process is invoked. The default interval is 360 minutes which means that the process runs after every 6 hours to check for and file emails.

Default value (in minutes): 360

ProcessMappedFoldersOnStartup

Enable this option to ensure that processing of mapped folders begins as soon as the iwWCS process starts; without waiting for the MappedFolderInterval to elapse.

Example:

"ProcessMappedFoldersOnStartup":"FALSE"

TRUE (enabled)

FALSE (disabled) Default

OutlookSyncWaitInterval

The time duration in minutes for which Inbox filer waits before processing new emails.

Example:

"OutlookSyncWaitInterval":"15"

Default value: 15

MarkAsQueuedBeforeFiling

Determines whether messages are marked as queued before filing when using client-side filing. 

NOTE: Doesn't apply to server-side filing or filing in offline mode.

Example:

"MarkAsQueuedBeforeFiling": 0

1 (Do not queue if running in Exchange Online mode)

0: Always Default

EnableOldChangeDescription

Enables or disables the feature to set the change the email description when using Send and File option.

NOTE: ClientSideSendAndFile option must also be enabled to enable this feature.

Example:

"EnableOldChangeDescription": 0

1 (Enabled)

0 (Disabled) Default

UseFilingLocationPrefix

When enabled, filing location path on filed messages is prefixed with double slash. Applies to client-side filing only. For consistency with iManage FileSite and Server-side filing, use 1.

Example: 

"UseFilingLocationPrefix": 0

1 (yes)

0 (no) Default

NoOfDaysBeforeDelete

The records of filed emails that are maintained in the offline filing tables are deleted automatically after 7 days. Modify this value to keep the records for a longer or shorter duration. 

Default value: 7

NoOfRecordsInBatch

Since there may be a limit for the amount of data that can be sent using RestAPI, the emails are batched before they are sent to Work Communication Server. By default, 10 emails are sent together for one iManage Work location. If there are multiple locations from different libraries, the emails are processed in a batch based on the libraries.

Default value: 10

FilingRetryCount

If there are errors during filing the process, filing is attempted up to FilingRetryCount times. The count is incremented by 1 for each filing attempt. After reaching the default value, no further attempt is made to file to the emails and they are marked as Error at the last attempt.

Default value: 7

OfflineFilingDelayAfterConnect

Specify the delay in seconds after which emails previously filed offline are uploaded post a successful server connection.

Example:

"OfflineFilingDelayAfterConnect": 15

Default value:15

LoginOnStartup

Specify whether Outlook should automatically connect to the iManage Work Server when it starts.

Example:

"LoginOnStartup": 0

NOTE: The behavior of LoginOnStartup depends on the ShowWorkPaneOnStartup configuration. 

• If ShowWorkPaneOnStartup is set to 2, then, 
  • When LoginOnStartup is set to 1, then Microsoft Outlook automatically connects to iManage Work Server.
  • When LoginOnStartup is set to 0, then Microsoft Outlook does not automatically connect to iManage Work Server. 
• If ShowWorkPaneOnStartup is set to 1, then Microsoft Outlook connects to iManage Work Server, then Microsoft Outlook is always connected to iManage Work Server irrespective of the value set for LoginOnStartup that is 0 or 1. 
• If ShowWorkPaneOnStartup is set to 0, then,
  • When LoginOnStartup is set to 1, then Microsoft Outlook automatically connects to iManage Work Server.
  • When LoginOnStartup is set to 0, then Microsoft Outlook automatically connect to iManage Work Server, if iManage Work Panel was open when the users closed Microsoft Outlook.
  • When LoginOnStartup is set to 0, then Microsoft Outlook doesn't automatically connect to iManage Work Server,  if iManage Work Panel was not open when the users closed Microsoft Outlook.

1 (True) Default

0 (False)

EmailAddressTypeForNewMessage

2 (CC) Default

3 (BCC)

ShowApproveAsDropDown

Add this option to display the Send, File, and Approve drop-down option for the Send Only button in the Select Filing Location dialog box.

1 (Enabled)

0 (Disabled) Default

RemoveLuggageTagForSendOnly

Remove the luggage tag for emails that are not filed while sending (that is, if the Send Only button is selected).

Example:

"RemoveLuggageTagForSendOnly": 1

1 (Remove) Default

0 (Do not remove)

IncludeLuggageTag

Specify whether to include the luggage tag in the subject line.

1 (True) Default

0 (False)

FirmID

Specify ID of the organization for the luggage tag. Limit it to 3-5 characters; no special characters allowed.

Default value: IMAN

OldFirmID

Use it for upgrading the old database to a new one.

Example:

"OldFirmID":"IWOV"

Default value: IWOV

SubjectTagRightAlign

Decide the luggage tag location: end of the subject or beginning of the subject.

Example:

"SubjectTagRightAlign":1

1 (end of the subject) Default

0 (beginning of the subject)

MaxSuggestedLocations

Specify the maximum number of locations to be displayed under Suggested Locations.

Default value: 5

Recommendation: 1 - 20

SuggestFilingLocationWhenRecipientsChange

Specify whether suggested filing locations must be displayed when the email recipients change.

TRUE (enabled) Default

FALSE (disabled)

MaxRecentLocations

Specify the maximum number of locations to display under Recent Locations.

Default value: 10

Recommendation: 1 - 20

MaxRecipientsForSuggestion

Specify the maximum number of recipients (email addresses) to be used to calculate suggestions.

Example:

"MaxRecipientsForSuggestion":4

Default value: 4

Recommendation: 1 - 20

DisableDefaultSuggestion

Disable default filing location suggestions by iManage Work. Set the value to 1 if you see performance issues while opening or selecting an email.

Example:

"DisableDefaultSuggestion":0

1 (disable default suggestions)

0 (allow suggestions) Default

SendAndFileEncryptedEmails

Specify whether encrypted emails should be saved while sending.

Example:

"SendAndFileEncryptedEmails":0

1 (do not save)

0 (save) Default

DeletePermanently

Specify whether emails should be permanently deleted if the Delete option is selected while sending emails.

Example:

"DeletePermanently":0

1 (delete permanently)

0 (do not delete permanently) Default

EnableClientMatterTagFormat

Specify whether folder ID (FID), Client.Matter, or both Client.Matter and FID should be added to the luggage tag. 

0 (FID) Default

1 (Client.Matter)

 2 (Client.Matter + FID)

HideDisplayName

Hide the workspace and folder names in the email address when the folder is selected for filing.

Example:

"HideDisplayName":0

1 (hide)

0 (show) Default

AlwaysPrivateForEmails

To ensure that all emails are filed as private even when they are filed to public folders, enable this option. When enabled, the following behavior is seen:

• File As Private option appears selected whenever Outlook is launched.
  
• Files emails privately even if users uncheck the private filing option on the iManage Work toolbar or the filing location dialog box. The check box appears selected again after Microsoft Outlook is restarted.
• Applies to all filed emails (filed using both client-side and server-side filing) and even to emails that filed by dragging them into iManage folders.
• Overrides the DefaultValueForPrivate option and the settings it contains are ignored.

Example:

"AlwaysPrivateForEmails":0

1 (True)

0 (False) Default

DefaultValueForPrivate

Select or clear the File As Private option by default.

0: The File As Private option is not selected and the user selection is retained temporarily for the current session. Default

1: The File As Private option is selected and the user selection is retained temporarily for the current session.

2: The File As Private option is not selected and the user selection is retained for the next Outlook session.

SaveEmailOnSend

Determines whether iManage Work saves the email to the drafts folder before initiating a send and flle. 

Example:

"SaveEmailOnSend":0

1 (True)

0 (False) Default

EnforceOutlookSensitivity

File email as Private if mail item Sensitivity is set to PRIVATE.

Example:

"EnforceOutlookSensitivity":1

1 (Yes) Default

0 (No) 

EnableEMM

1 (Enabled) Default

0 (Disabled)

EnableWorkPane

Enable or disable the iManage Work Panel in Microsoft Outlook by showing/hiding the Work Panel ribbon bar button.

1 (Enabled) Default

0 (Disabled)

ShowWorkPaneOnStartup

Configure the iManage Work Panel to open by default when Microsoft Outlook is started.

1 (always display)

2 (never display)

0 (display if it was visible before previous exit from Outlook) Default

InitializeWorkPaneOnStartup

Configure if the iManage Work Panel should be initialized on Microsoft Outlook startup. Initialization can delay Outlook startup by a few seconds.

If this is not enabled, users may experience a delay instead when the iManage Work Panel is displayed.

Example:

"InitializeWorkPaneOnStartup": 0

1 (Always initialize on startup)

0 (Do not initialize unless iManage Work panel is being shown on startup) Default

ShowWorkPaneDelay

Number of seconds it takes for the iManage Work panel to appear after Microsoft Outlook startup.

10 (seconds) Default

Minimum: 1

LanguagesMenu

Configure the languages available for searching in the Browse and File and Select Filing Location dialog box.

As desired, remove languages from the default value or change the order in which they appear. You cannot include any additional languages.

Example:

"LanguagesMenu":"ENGLISH,FRENCH,GERMAN,SPANISH,CHINESE,JAPANESE"

Default value: ENGLISH, FRENCH, GERMAN, SPANISH, CHINESE, JAPANESE

MaxAttachmentsToSave

Specify the maximum number of attachments that should be saved when multiple emails are selected and Save Attachments is selected.

Default value: 50

Recommendation: 1 - 100

MaxEmailsForSaveAttachments

Default value: 50

Recommendation: 1 - 256

LegacySuggestionDBFilePath

Specify the location of the legacy suggestion database. This feature is useful after you upgrade, because the old suggestions can be made available in the new environment too.

Example:

"LegacySuggestionDBFilePath":""

Not applicable

FolderSuffix

Specify the suffix for Inbox folders that are linked to iManage Work folders.

Default value: [Work]

paint_cycle_count

During the Outlook startup process, the icons in the Outlook tree are painted to indicate folders linked to iManage Work. If a mailbox contains a large number of linked folders, the startup process might be slower. iManage has introduced two keys to control the painting behavior for a set time duration.

0 (will not run the Timer Paint function to paint linked folder icons)

3 (Runs the Timer Paint function thrice to set the icon for linked folders for 5 seconds which is the default paint interval. The maximum time that this function spends is 15 seconds.) Default and recommended

paint_interval

Configure this value to set the time in each paint cycle. After the duration is complete, no more icons are painted to avoid additional delay in startup.

Default value: 5 (time in seconds)

ShowPromptOnFolderCreate

Prompt users to link to an iManage Work folder when they create a folder in Outlook.

Example:

"ShowPromptOnFolderCreate": 1

1 (prompt) Default

0 (do not prompt)

FileMessageAsPrivate

Control the behavior of the File message as Private option available in the Link Folder to iManage dialog box.

Example:

"FileMessageAsPrivate": 0

0 (visible, but not selected) Default

1 (visible and selected. If the folder was previously linked, then the value from the folder is used)

2 (grayed out and not selected)

3 (grayed out and selected by default. The user cannot change this value. For previously linked folder, the value is based on whether the folder was linked as private or not)

EnableSendSecureMessage

Enable or disable the Secure Send feature, which enables you to:

• Upload files to iManage Share if the attachment size exceeds the threshold.
• Control access to the attachment by specifying the duration for which the attachment link is active, and whether recipients can give access to additional users.

For more information about the Secure Send feature, refer to iManage Work Desktop for Windows online help.

1 (Enable) Default

0 (Disable)

MinimumAttachmentsSize

Default value/Maximum value: 2147483647 (in bytes)

Recommendation: 1 - 20 MB

MinimumCharsWorkspaceSearch

Specify the number of characters to enter, after which search is triggered.

Example:

"MinimumCharsWorkspaceSearch": 3

Default value: 3

Minimum value: 1

InsertLinkAsAttachmentOnly

Specify if attaching an NRL link in an email should add an HTML link in the email body.

Example:

"InsertLinkAsAttachmentOnly": 0

0 (insert both NRL and HTML link) Default

1 (insert NRL only)

EnableCopyFolder

Specify if copying folders from Outlook to an iManage Work workspace or a folder is enabled or disabled.

"EnableCopyFolder": 1

0 (disabled)

1 (enabled) Default

EnableMoveFolder

0 (disabled)

1 (enabled) Default

DefaultDragAndDropIsMove

Specify the default behavior when users drag emails to iManage folders in the Work Panel. When enabled, the emails are moved to the iManage folder and the Delete Items folder in Microsoft Outlook.

"DefaultDragAndDropIsMove": 0

NOTE: From 10.6.0 onwards, Delete, Print and Private options available in the EMM toolbar when selected is applied when users drags emails to iManage Work Panel for filing or use Quick File for filing. As a result of this change, this configuration setting is deprecated and is applicable only if the EMM toolbar is hidden. This does not apply to Mapped folders. 

0 (copy) Default

1 (move)

AllowSearchAllDatabasesInBrowseDlg

Specify if users can search across all databases in the Browse and File and Select Filing Location dialog boxes. 

"AllowSearchAllDatabasesInBrowseDlg": 1

0 (disabled)

1 (enabled) Default

AutoSelectFileTo

Specify if the File To check box in a new email window must get selected automatically when a suggested filing location is available.

"AutoSelectFileTo": 0

1 (select)

0 (do not select) Default 

DefaultFilingAction

Use this option to set the default filing action in Send and File dialog box.

"DefaultFilingAction":6001

6000 (Cancel)

6001 (Send Only) Default

6002 (Send and File)

6003 (Delete After Sending)

6004 (Send and File As Private)

6005 (Send and File with Print)

IgnoreBCCCheck

Use this option to disable the warning message stating that there are recipients in the Bcc field.

"IgnoreBCCCheck":0

1 (Do not show the warning message)

0 (Show the warning message) Default

FolderSuffix_Old

Specify the old suffix value for Microsoft Outlook folders that are linked to iManage Work folders. This is for use if you have changed from one folder suffix to another, so that folders with the old suffix are still recognized as linked folders.

"FolderSuffix_Old":"[WorkSite]"

Default value: [WorkSite]

OfflineFilingInterval

Use this option to configure the frequency with which you check for messages that were filed offline, and then if found, attempts to file them. The unit is in seconds (600 = 10 minutes).

"OfflineFilingInterval":600

Default value: 600 seconds

DatabaseMappings

Use this option to allow database names to be masked in the luggage tag in email subject.

The mapping can be specified in key:value pairs. Multiple maps can be separated by commas—for example, {"DB1":"DB1Alias","DB2":"DB2Alias"}.

"DatabaseMappings": {}

WaitTimeForSuggestion

Default value: 1 second

SupportedMessageClassesForFiling


Specify the comma delimited list of Microsoft Outlook message classes that are allowed to change when filing messages to iManage Work Desktop for Windows.

If a message class is not in this list, then the message class in the copy of the message in Microsoft Exchange is not changed when filing the message to iManage Work Desktop for Windows. IPM.Note is supported by default.

"SupportedMessageClassesForFiling": ""

Default: IPM.Note

EnableMapSubfolders

Specify if the Map Subfolders option in the Link folder to iManage dialog box should be enabled or disabled.

Example:

"EnableMapSubfolders": 1

1 (enabled) Default

0 (disabled)

SuggestionDelayAfterFiling

Specifies the time in seconds to wait before updating the suggestion in the message window after filing the message.

Example:

"SuggestionDelayAfterFiling": 1

Default: 1

EnableSendAndFileOnSendToRecipient

Enables Send and File functionality when sending an attachment from another application.

Example:

"EnableSendAndFileOnSendToRecipient":1

1 (enabled) Default

0 (disabled)

NotifyDirtyFolder

Enables Notify Marked Folder functionality.

Example:

"NotifyDirtyFolder": 1

1 (enabled) Default

0 (disabled)

DirtyFoldersCountForNotification

Describes the maximum number of folders to monitor for Marked Folders Notification.

Example:

"DirtyFoldersCountForNotification": 100

Default: 100

CacheMode

Enables filing emails that are older than the Microsoft Outlook cache.

Example:

 "CacheMode":"FALSE"

Default: TRUE

FALSE

TRUE

RetryIntervals

Defines the time intervals between retries of email filing operation.

Example:

"RetryIntervals": "30m,2h,1d"

NOTE: Valid units are m (minute), h (hours), d (day) and w (week). Values are comma-delimited. Each comma-delimited element of the configuration can have only one unit. For example, 1h 30m is not a valid value to designate 1 hour and 30 minutes. Use 90m instead, in that case.

Default: "30m,2h,1d"

Representing 30 minutes for the first retry, 2 hours after the first retry for the 2nd retry and 1 day later for the 3rd retry

AddLuggageTagToCustomDescription

When this option is enabled, the luggage tag is appended to the custom description specified by the user on send and file. 

NOTE: The option EnableChangeDescription must be enabled for this setting to be applied. 

Example: 

"AddLuggageTagToCustomDescription": 0

1 (enabled)

0 (disabled) Default

PreloadWorkPane

Controls whether content in iManage Work Panel is preloaded in the background upon starting Microsoft Outlook. 

Example:

"PreloadWorkPane": 1

1 (enabled) Default

0 (disabled)

ShowFilingProgressDialog

Show or hide the first progress dialog during email filing.

Example: 

"ShowFilingProgressDialog": 0

1 (show)

0 (hide) Default

EnableMappedFolderFileNow

When this configuration setting is set to 1, the File Now option is enabled in the right-click context menu on a mapped folder. Users can use File Now to sync the linked folder, on demand. This is helpful especially when users have moved emails to a mapped folders and the user wants to ensure the emails are filed promptly."

Example: 

"EnableMappedFolderFileNow": 1

When this option is enabled, you can access the File Now in the Link to iManage submenu in Microsoft Outlook by doing the following: 

Right-click a folder, select Link to iManage, and then select File Now. 

1 (show)

0 (hide) Default

EnableRetryFilingAction

When this configuration setting is set to 1, the Retry Filing option is enabled in the right-click menu for all the emails in a mapped folder that are marked with an error icon indicating that the filing failed. Users can use this option to retry filing on those messages. 

Example: 

"EnableRetryFilingAction":1

1 (show)

0 (hide) Default

CheckInspectorEMMToolbar

In some rare cases, Microsoft Outlook does not load the EMM toolbar in a new email window. When this configuration setting is set to 1, it ensures that iManage EM toolbar is available in all new email windows. 

NOTE: Enabling this configuration setting can cause performance issues. Hence, we do not recommend that you enable this option, by default. Enable this configuration setting only if Microsoft Outlook does not load EMM toolbar in a new email window.

Example:

"CheckInspectorEMMToolbar": 0

1 (yes)

0 (no) Default

RenameEmailsMaximum

Default value: 50

DisplayRenameOnFiling

0 (Hide) Default

1 (Show)

2 (Show and select on startup)

ValidateFilingLocationFolder

Alerts if the location folder is unavailable (using the File to check box) while sending emails values. The default value is 0. 

Example: 

"ValidateFilingLocationFolder": 1

0 (doesn't check if the folder isn't valid) Default

1 (check if the selected folder is valid)

EmailAttachmentCopyPreviousComment

Determines how comments are set when saving an attachment as a new version.

Example:

"EmailAttachmentCopyPreviousComment: 1"

Default value: 1

UseFolderAddresses

The UseFolderAddresses setting configures whether folder addresses are used when performing Send and File. The default value of this configuration is 1 (true). When this value of this setting is 0 (false), Send and File actions don't use folder addresses.

When UseFolderAddressesis set to 0, the Send and File action doesn’t use folder addresses. Hence, subsequent replies can’t be filed automatically when multiple filing locations are selected. To make sure all subsequent replies are filed automatically, set the EnableMultiselectSendAndFile configuration setting to 0.

Example: 

"UseFolderAddresses":1

1 (true) Default

0 (false)

EnableMultiselectSendAndFile

The EnableMultiselectSendAndFile configuration setting disables the selection of multiple filing locations when performing a Send and File action to maximize automatic filing of emails responses. The default value of this configuration is 1 (true).

Example: 

"EnableMultiselectSendAndFile": 1

1 (true) Default

0 (false)

ExcludeEEMessagesFromMappedFolders

Ignore EE messages that have Explorer:Filed=true property, while processing mapped folders.

Example:

"ExcludeEEMessagesFromMappedFolders":"FALSE"

FALSE Default

TRUE

EnableSmartAttachment

Lets you turn on or turn off the smart attachment feature for Microsoft Office documents when custom XML with cloud information is embedded into the document attached to email. 

Example:
"EnableSmartAttachment": 1

1 (enabled) Default

0 (disabled)

SortSubfolders

Specifies whether subfolders in the Browse and File dialog should be sorted by name. 

Example:
"SortSubfolders": 1

1 (Sorted ascending) Default

0 (not sorted)

ConfigKeyFormat

When EnableClientMatterTagFormat is set to 1 (Client.Matter) or 2 (Client.Matter + FID), the ConfigKeyFormat setting can be used to specify which custom attribute fields should appear in the luggage tag.

The default value is '25.26' which represents the fields custom 1 and custom 2. Valid values for this field must contain two numbers separated by a period. Valid values are: 

• Custom 3 to Custom 12 fields have the numbers 27 to 36 respectively,
• Custom 29 field is 53
• Custom 30 field is 54.

The field specified first (for example, custom 1 in the configuration "25.26" cannot contain periods in the actual metadata values in the workspaces to support proper parsing. 

Example

"ConfigKeyFormat": ""

For more information on numeric values for supported custom fields, see Appendix A - Custom Attribute IDs .

Default value: "25.26"

Represents custom 1 and custom 2